Pallet Rack Storage End Caps - Metal Pegboard Set for Industrial Shelving Units

Specific weight capacities depend upon quality of installation, substrate installed into, bracket or hook selection, weight distribution, actual load centers, and a whole host of other variables which make advertising specific and idealistic laboratory load ratings potentially misleading (be cautious of any brand that does this because this sort of advertising can be dangerous). That being said, our panels and brackets can hold a lot of weight when properly installed and used correctly. We offer panels, brackets, and shelves rigid and strong enough to support most heavy common storage items such as bicycles, ladders, sledge hammers and ironing boards just to name a few common applications.

As a general rule of thumb, if you are installing into traditional drywall and using the included drywall anchors, our “recommendation” would be no more than 100 LBS per panel (200 LBS per panel into studs or similar), no more than 10-20 LBS per shelf assembly with evenly distributed weight, no more than 2 LBS per plastic bin, no more than 10-15 LBS per hook that engages in 2 slots, and no more than 5-10 LBS per hook that engages in a single slot. All recommendations assume properly installed panels, weight relatively evenly distributed across the panel face, as well as weight situated at the base of each hook or shelf as opposed to the tip.

While we cannot guarantee any particular install done by individuals or 3rd parties we are happy to assist if you have a specific application that concerns you, contact us at sales@wallcontrol.com or on our Contact page and we will be glad to assist you.

The only tools you'll need to install Wall Control metal pegboards are a drill, a level, and maybe a screwdriver and hammer for tapping in drywall anchors. No framework is required so very little "DIY" is necessary. If you've ever hung a picture on a wall, you can hang Wall Control pegboard too, it is just that easy. Just attach the pegboard to the wall and you're all set.

The patented 3/4-inch formed mounting flange spaces the Wall Control Pegboard from the wall. The mounting holes are on standard 16-inch stud center spacing alignment, so you simply mount the panel directly into the studs with the mounting screws provided. Align the edge of the panel with the center-line of the stud and you'll be all set and can share studs all the way down the wall if the studs are 16-inch on-center. If they are not, no problem, just use the included drywall anchors.

Wall Control Pegboard will mount to any flat surface, but if attachment is not directly into wall studs or secure drywall, we recommended that you consult with your local hardware representative for proper fastener selection as your application might call for hardware that is not included with the pegboard. For more information and some helpful how-to videos, please refer to our Installation section below.

Wall Control lasts a lifetime, it does not warp or crumble over time - unlike wood / masonite pegboard, slatwall panels, or even plastic pegboard. The heavy duty construction of Wall Control Slotted Panels & Accessories surpasses all other pegboard or slatwall storage options, and at an affordable price.

What is The Best Pegboard?

Nothing comes close to the Durability, Versatility, Stability, and Appearance that Wall Control Pegboard offers.

Why is Wall Control Pegboard Superior to Traditional Pegboard?

• Durability. Our panel is made from 20 gauge steel. It has a scratch resistant baked-on powder coat finish. Unlike traditional pegboard, Wall Control Pegboard is moisture resistant and will not swell or warp and the openings in the face of the panel will not fray or enlarge from repeated use.
• Versatility. A wide assortment of hooks, brackets, shelves and bins are available for this system. All of the hooks, brackets and shelves are steel, powder coated components. These components all move easily from slot to slot allowing your system to change as your storage needs change. With our "Combo" panels standard traditional pegboard style hooks may be used along with our patented Wall Control "double offset" style accessories.
• Stability.The slot face design and stabilizing tabs on larger brackets secure your stored items better than traditional "round hole" design hooks and brackets. In addition, the "double offset" design on all our components dramatically reduces the possibility of unintentional hook disengagement when the stored item is removed. Don't you just hate when the hook comes out with the tool?
• Attractive Appearance.Wall Control Pegboards' powder coated or galvanized finishes are not just durable, but they are also highly attractive. Wall Control peg boards are available in (10) different color choices, Wall Control slotted pegboard accessories are available in (4) different color choices. Create a custom looking workspace by mixing and matching panel and accessory colors. Wall Control panels and attachments easily wipe clean with a damp rag so they keep their "new" appearance for years.
• Ease of Installation.The 3/4-inch flange on the Wall Control Pegboard eliminates the need for any supporting framework and the mounting hole positions align with standard 16-inch stud centers. The modular design of the standard 16-inch x 32-inch panels make it convenient to handle. So in just a matter of minutes your new Wall Control Pegboard is installed and ready for use!

All major Credit Cards as well as PayPal, Amazon Pay, Apple Pay, and Google Pay are accepted. We do not accept Check or Cash for direct purchases and do not extend Net 30 Terms outside of our wholesale distribution.

If your order is over 1 LB, it will likely ship via UPS or FedEx Ground. If your order is under 1 LB, it will likely ship via USPS. Currently, orders over $50 qualify for our FREE Shipping promotion. As a manufacturer, Wall Control only offers Ground and Standard shipment speeds. If you are in urgent need of Wall Control products, we recommend purchasing through a retailer who can often offer expedited shipping at a reasonable cost.